-

2026-5-12Fiber Optic Splitter Guide: PLC Splitter Types for Every Deployment Scenario
The passive optical splitter is the single largest source of signal attenuation in any PON network, and yet most deployment failures trace back not to the splitter's optical performance, but to ch -

2026-5-08Breakout Cable Guide: Parallel Fiber Applications for 40G Through 800G Networks
A fiber optic breakout cable-also called a fanout or harness cable-takes one multi-fiber MPO/MTP connector and splits it into individual duplex connectors (typically LC). This allows a single high-spe -

2026-4-30Optical Capacity Planning: How to Future-Proof Your Fiber Network
The datacom optical component market grew over 60% in 2025, crossing $16 billion in revenue (LightCounting via Introl). That number matters for one reason: every organization competing for 400G and 80 -

2026-4-30Transceiver Procurement Guide: 7 Vendor Selection Criteria That Matter
Optical transceiver modules are commodity hardware, until one fails during a production window and takes a revenue-generating link with it. At that point, the difference between a vendor you chose del -

2026-4-30AOC Active Optical Cable: Applications, Benefits & Selection Guide
What Is an AOC Active Optical Cable? Every data center interconnect conversation eventually lands on the same question: copper or fiber? The real answer is neither, it depends on distance, and that -

2026-4-29Optical Transceiver Testing: The 6 Verification Steps That Separate Reliable ...
A single miscoded EEPROM field can shut down a port on a Cisco Nexus switch before a photon ever hits the fiber. A DDM readout that looks perfectly healthy can mask a link running within a hair's -

2026-4-2810GBASE-T SFP+ Module: Copper Transceiver Deployment Guide
Forty-eight 10GBASE-T SFP+ modules, coded for Cisco Catalyst 9300L, went into a hospital network in Southeast Asia last quarter. The cable plant was Cat6a installed in 2017, runs between 25 and 40 met -

2026-4-27High Speed Optical Interconnect: Data Center Solutions
Last quarter we had a customer ship back forty 400G DR4 modules claiming random link flaps on their Arista 7060X5 switches. Before we even opened the RMA paperwork, our test engineer asked one questio -

2026-4-25Muxponder vs Transponder: Understanding the Difference
Most articles frame the muxponder vs transponder question as a vocabulary exercise. What does each one do, how are they different. The real issue is operational, and it shows up months after the hardw -

2026-4-24Optical Transceiver Form Factors: SFP to QSFP-DD
The most common support ticket we handle is not about optical power or bit errors. It is about physical fit. An engineer orders QSFP-DD modules for a 100G-to-400G upgrade, inserts them into older QSFP -

2026-4-23DWDM Wavelength Planning: C-Band & L-Band Guide
Most channel tables tell you where each ITU wavelength sits. They do not tell you which channels to actually activate, how many to leave empty for your next upgrade cycle, or what happens to your C-ba -

2026-4-221G SFP Transceiver Guide: 1000BASE-SX, LX, ZX
The 1G SFP transceiver isn't going anywhere. Not because anybody's excited about gigabit speeds in 2026, but because every out-of-band management port on your Cisco 9300 stack, every IP camera


